For sale is my 1997 Toyota FZJ80 Land Cruiser camper conversion with 5.3 Vortec and 4L60E transmission.
Drivetrain
2001 5.3 Vortec V8 engine swap (LS swap) 170k miles
All sensors and front mount accessories replaced with swap, new water pump, new oil pump, new timing chain and gears, new f body oil pan, new alternator, new AC pump.
AC fully functional
Mild tune done by ER Automotive
Motor has emissions removed, if you live in a state that requires emissions you can look into the Montana LLC work around
4L60E trans
NOVAK Conversions modified pan
Toyota HF2A(V) Factory T-case
Marks adapters trans/t-case adapter
2wd/4wd conversion spool (lockout hubs)
Open Diffs, it does NOT have factory lockers
Chassis
290K miles on chassis & body
OME 3” suspension lift with OME shocks, heavy coils in rear
Redhead Steering gearbox, new 4/24
ARB adjustable front panhard
Slee stainless extended brake lines
Delta VS rear panhard re-location bracket
Front axle full knuckles rebuilt, koyo bearings, gaskets, etc. All tie rod and drag link ends replaced with OEM Toyota parts, sandblasted and painted with chassis paint
Sway bar bushings and ends replaced
LC Phil sway bar disconnects
Front radius arms and upper control arm bushings replaced with Toyota OEM (lower radius bushings are OME)
AVM lockout hubs
Driveshaft universals have been replaced
Frame extension with custom spare tire mount, allows a full 35” tire, also allows the spare to be pulled farther up into the chassis with new style cable crank winch, mac’s y-strap for extra protection
Wheels & Tires
[Quantity 5] 17×9.5 Black Rhino Stadium wheels with custom machined hub bores
[Quantity 5] 315/70R17 BFG K02 All terrain tires
Interior
Front seats, center console, rear cushion re-upholstered, re-foamed, all to match
New OEM heater core installed
All factory gauges are operational
Extras
ARB 8’ awning
ARB winch bumper (winch not included)
Radius fabrications stainless snorkel
Amber fog lights
I have both rear leather seats
Camper Exterior
Custom aluminum wedge style popup, LC body cut behind rear doors, camper built in place using insulated aluminum sandwich panels, aluminum sub frame and fabricated parts, 8’ tall x 17’ OAL
Water-resistant tent fabric on popup, 3 zipper windows with screens
Artic Tern Windows
Fabricated hatch style rear door with double acting dead bolt style lock, dual gas struts lift the door
Poli-all extruded PVC/aluminum hinges used for roof and rear door.
Roof is fully insulated, 200w solar panel
Torlift scissor steps, easily removable when traveling
LED tail lights
I also have some aluminum mounts I made that will allow a pair of inflatable stand up paddle boards or other objects to be stored on the rear wall
Camper interior
Queen size memory foam mattress, bed platform hinges from the front so you can move around, stand at sink, etc.
Wood cabinets with butcher block top
Dometic sink with electric water pump
Dual (or more) interior jerry can storage
Shelf for basic camp style stove
Wayska cabin diesel heater with custom external fuel tank (aluminum)
Flush mount interior puck lights, 4 in the roof and 4 under the bed, controlled by two independent switches or remote
Victron energy solar controller, blue seas switch panel/fuse box, 200w solar panel, agm deep cycle house battery (independent of LC)
Iceco fridge
Bench opens for storage, also has a cubby for small cassette toilet or stair storage, etc.
I also have both rear seats that will be included
Known issues
Motor ticks when it’s cold, I’ve replaced both manifold gaskets and two broken manifold bolts which seemed to help
Body had some rust in the past but I’ve cut the majority of it out and welded in new patch panels from a donor 80 series cab, I also replaced both front inner fenders as there was some rust near the front mounts, inner fenders are the matching emerald pearl green
Windshield is cracked
Passenger seat has a stripped motor gear
Rear main seal has a slight drip
Odometer seems to be intermittent lately
Price: $30,000
More info: Click here to see original eBay auction and get more information (Affiliate link)
Seller's other items: rigmachineco (Affiliate link)
Location: Stevensville, Montana, United States
